I have a Hyundai excavator robex 220LC-9S that just refuses to accelerate. Does anybody know how to test the accel actuator as i get no response from it or what else i can look for
Do you have any trouble codes?
No nothing unfortunately
Does machine works in auto mode?
Also no every thing works hundred except the acceleration it does not rev up at al manually by hand yes it pics up
Did you turned off auto deceleration?
Good day If you control switch looks as the illustration you can check it out with the information. Kind regards Uffex
Thanks the illustration helped so know i know my control switch is working seem i will have to replace the accel actuator
Not sure about the actuator do you have a picture of connectors also ? Uffex
Unless you turn off automatic decel. Your manual engine speed will not work! If you have problem with your potentiometer you should have a trouble code!
Sorry had connection problems yesterday. Yes i did turn it of. i have opened the accelerator actuator box and put power directly to the small motor on the inside it does not turn at all so i suspect it must be the problem Thanks for the help so far
Hi. if you need a accelerator control I might be able to get one at least half price over what the dealer would ask. Do you have a part number, year of machine and serial number ? these are brand new , not rebuilt units .
Hi yes i would be interested Part no: 21EN-32300 Excavator Model: ROBEX 220LC-95 Product id: HHKHZ614LE0006873 Please if you could send me a mail with the price to [email protected]
Hi I have an issue with auto rev on my hyundai robex 180w-95.When levers are operated it doesn't increase Reves unless I adjust manually on the cluster,what could be the problem.
Good day Do you have the same issue with travel? Kind regards Uffex