Angle and tilt on a caterpillar 308c sr , it has hammer piping with a hammer switch but the bucket just slams one way , i am aware of the two manual valves under the couling but neither of these load up the foot pedal, could it be because the ram which operates the knuckle boom has been removed and circulation bypassed not allowing the valves to pressurise the foot pedal which once operates the knuckle, everything else works fine, I was just hoping to add the angle till option to my mud bucket ?
Ask mods to move to mini excavator section and include serial number.
Done. Absolutamebly. All technical & parts info stems directly from the Serial Number.