hydraulic problems on stabilizers ..it let all stabilizers down but one (rear left)would ease back up a foot or so after rebuilding the control valve ..same thing the same stabilizer leg (rear left) would ease back up . so i changed 4 hoses that ran 2 of the stabilizers in rear and it changed to right side rear so i know now its not control valve ......... i then rule out cylinder and control valve and start thinking load valve so i change them .. ends up one was replaced before i went to work at this place and was wrong part .. they have spent 10k on this machine and i found problem that costed 300..lucky i guess you call it but now i have a electrical problem its letting front right leg down and raising it after 1hr of running but unplug solinoid to that control valve and it stays up....... i dont know where to start looking or how to run new wires that will not get cut or broke ...... any suggestions
Welcome to HEF truecountry! :drinkup
problem solved appertice tech came in asked what we had did and what was wrong and i tolded him 30 mins later,,,,its fixxedddddddddddd and was noway i could have did it..... he added a tee and hose from lower pressure side of control valve back to filter....... and stabalizers stay up like a wedding _ick lolololol glad to know he could fix this and now i can share info