When the rpm is at low idle the bucket will roll back, when the rpm is increased it stops like something kicked it out, if I have high rpm and slowly move the joystick it will roll back but if I move the stick quickly roll back it stops instantly, I’m thinking it’s the joystick, has anyone ever had this problem and what was the fix? Thanks.
Well, after doing lots of research I narrowed it do to the safety relief valve on the Husco hydraulic valve unit, took out the valve and the seals were broken inside, both springs were good, replaced the broken seals and all is good again. Hope it helps others with this type of issue, hydraulics not working under high pressure.