Gents, a stupid question... Looking from the work card on installing and remove the axles in this machine, it mentions 2 axles on the left side!! What lift my eye brow was the fact i only saw 1 left and 1 right in the parts cathalog, and both the same serial number... Can someone throw some light a me? Machine is 1DD06574. D5H LGP series II Thanks
A differential steer machine has 3 A clutch steer machine has only 2 Im 99 percent sure on this. It's been a minute since I've had either apart
Mine is power shift with clutch/brake steering... i thought diff steering was much later on the line... nevertheless i wouln´t mind if mine was. Basically u confirm 2 axles of the same part number? Thanks
As usual I'm wrong you have 3
Ref the axle shafts on this particular machine. Haven't we been here before.? Oh, and there are 4 axle shafts not 3. See Tyler's post above.
Wrong 2 times today I must have forgot how to count
Thats exactly the point... ordered the parts and was looking at assembly work card and they mentioned 2 shafts left side... and 1 right... Where they shouldn't i guess... Lets see how it ends up... Thanks.
Could itbe if the finals where removed and not the transmission on was left in the machine
? .
Could one shaft still be in the machine
Nah nah , u got it wrong.. The machine is 1DD known as D5H LGP... wich is too wide and long for the farm jobs. We will straighten it to the 8RC, D5H XL , width. As in our region we couln't find a STD or XL machine. One important matter and costly are the axles, one got to be positive on the parts...