Heavy Equipment Forums Heavy Equipment Community

Bell 315sj getting into neutral position once you engage number 2 and 4 gear

blessy ยท 2023-08-22 12:28

Have this bell 315 sj when you engage number 2 and 4 gears it gets into neutral position and the attached cluster board light switches on

Replies3
  1. #1mg23612023-08-23 05:33

    Welcome to HEF blessy ! Please post the machine's complete serial number. The code 522379.12 is for the park brake solenoid or its wiring. I also see the display says 1/2. What is the second code?

  2. #2Mereki2024-06-13 07:42

    Bell 315 tlb sj coasting to neutral. What could be the problem

  3. #3mg23612024-06-13 12:10

    Welcome to HEF Mereki ! Please supply a machine serial number. Also, please supply a better description of what the issue is. Is it not going into gear? Going into gear then going into neutral on its own? Does it happen cold/hot/either? Codes, active or stored (you may have to go into the monitor and look for them)?