Hey guys, I'm at a loss here. I'm getting a 65-06 code on my bobcat 331. Which I think means pilot lock/ work /safety solenoid short to ground. I thought I found a loose connector to one of the two solenoids that control the pilot flow. So I replaced both solenoids, bypassed the harness straight to the control console and replaced the arm rest proximity sensor. It works intermittently with no rhyme or reason.... Any suggestions? I have not overlayed the harness to the arm rest sensor yet mostly because the code suggests a shorted solenoid. My other thought was there is an issue with the control console (electronic display) itself? Thanks for any input!!! Ryan
No replies yet.