no hydraulics , none any help ?
Did you check engine coupling
did thanks coupling appears solid , small oil flow at filter / does any body know locate test steps for hydraulic solenoid power on ? switch test ok
Good day Hotrod Suggest you begin with servo pressure thats the smallest gearwheel pump on the drive - follow the output hose normally this will connect to a solenoid valve directly along side a accumulator as you operate the control lock out the solenoid should operate often you feel this with your fingers - if it fails run a jump lead and ground if the machine operates it is an electrical fault if not its time to check the servo pressure. Please see attached come back if you need more support. Kind regards Uffex