Hello all, My name is Yoram from Portugal. We have recently purchased a bobcat 753 which has been sitting for a long time, and we have a lot of beeping (quite annoying) and error codes ** 2 and ** 6 are displayed on the hour section. I know the ** is air filter and code 2 is "warning" and 6 is "Sensor no signal". But why is it we are getting these errors and what can we do to fix it? Other than that, it starts well, works well. Any help is appreciated. Thank you and regards. And happy new year!
I have another question about the same bobcat, we were told the oil tank for the steering was independent from the one of the hydraulic, but we cannot see any. Is that so? Where do we open to drain the old oil for replacement? Sorry to ask such dumb questions, it is our first machine of the kind. Thank you.
Probably needs a air filter sensor or the wiring is damaged. As for the hydraulics. There is one tank for the hydraulic tank, all functions use the same fluid. The chaincase is filled with the same type of fluid, but that fluid simply lubes the the chains.
Thank you Bobcatdan, That helps. Yoram