Heavy Equipment Forums Heavy Equipment Community

bobcat E26 hydraulics

lynden hazlehurst ยท 2020-05-17 12:40

hi i got a bobcat e26 2017 in its had the pecker on and it wont turn off not shore if they had the tap in right place can this blow seal some where is there away to test solenoid to me its like the valve stuck open help needed please

Replies4
  1. #1lynden hazlehurst2020-05-18 17:23

    has know one had a bobcat out there that the hydraulic just keeps pumping

  2. #2Mbar2020-05-20 06:15

    does the machine have any codes in it.

  3. #3lynden hazlehurst2020-05-20 07:29

    yes stuck aux striped it solenoid seem to work striped plunger put all back together but not pumping but not shore if working yet do u think be selenoid

  4. #4Mbar2020-05-20 09:42

    Check power on wires to selenoid. Wires come from controller. Power goes from thumb switch to controller then to coil. If wire is not shorted to power and thumb switch is not producing power then bad controller.