machine de idled a couple times and i thought the fuel filter was plugged- i put a new fuel filter on and primed bulb- machine ran for a bit then died out- hard restart- had to sqeeze primer bulb again- has done it a couple times- bled air out screw on top of housing- still doing it- primer bulb collapses and doesnt allow constant squeezing- squeeze it and it doesnt reinflate..........
Loosen the lines AT THE INJECTORS.. Loosen the return line on the injection pump.. That should reinflate the bulb.. Crank the engine until fuel squirts out of the injector lines and tighten.. HOLD THE THROTTLE WIDE OPEN/full throttle.. once it starts, SLOWLY BRING THE THROTTLE DOWN.. Good luck