Have a 2012 Bobcat T-630 having AC issue. The 25 amp fuse keeps blowing 5 seconds after turning on the AC blower switch. Checked coolant and its at 40psi mid green on gauges. Just replaced all filters and cleaned the coil pretty good. Does anyone have suggestions on what else to check or it could be? Thanks, Dave
Unplug the blower motor and then turn on the blower switch. If the fuse doesn't blow then your blower motor is bad. Welcome to HEF by the way. Lots of wisdom here.
Thank you for the suggestion. When I get a chance to try that solution I will write back on this forum to let you know if it worked. Thanks again.
As said above, disconnect everything on the circuit and add back until it blows, then you found problem. Had a roller one time that shorted a cold timing advance sensor, had to disconnect everything in the dash and go through 10 fuses to find the issue. Took many hours to find