what is the part # or size i need
That's a tricky one.... are those side pin? how big are they... maybe put a tape measure in the pic. what size machine? and make? or even better what make bucket and size?
580k phase 1 lost a tooth
Looks like a 230 aka 23 style tooth. Pretty common after the bobcat crimp on style tooth.
Could be, those are worn down a ways... wouldn't hurt to put a whole set on since a new one won't match.
yup 23 1 1/2 x 1 3/4 at 6 inch those are down to 4.7 inch long i could get new set but 70 for the tool ?
anybody got a tool they can part with
Why would you "need" the tool? I just use a slightly bent punch, held by a pair of slip joint pliers, and strike with a hammer, to remove them.
Yes, or just weld something similar to the actual tool... actually you wouldn't even have to weld it just cut and grind out of a piece of plate I don't remember the tool being that expensive 20-30 bucks I think... could have been an import model though seems like the dealer has been offering 'budget' choices for quite some time now...