helllloo out there ive looked for 2 yrs now for hydromatic pumps for my 1088LT excavator, my hyd. pumps are german made, they ve been split apart an one half lost, ive got the hydromatic numbers off the tag,, it seems these pumps were made for just few yrs, ive looked an called several scrap yards an cant find any still on a tractor. an sent what I do have to a hyd shop an to change them out to something newer would cost round 10 grand. looked threw equipment traders an no ones sitting on any pumps, an no one can tell me what else these pumps came on other than the 1088lt machine. saw few tractors over seas but scared to deal with them.:Banghead:Banghead
Sad story. Post up all the information you have, machine serial number, pictures of the tags, or at least all the information on them, we'll see if we can help. Oh, and pictures... always pictures.
thx for your help,,,, well I did find the numbers off the pump off the hydromatik tag, type A4V0 130 A4F028 LCDS P 45 43 568 L1 NR# 239.25.33.69 FAB# 2684636 an the machine is a case1088LT excavator serial number is CGG0020222 thx for any help guys I think the big pump is the high press. pump an the next pump is the low press. pump an then the pilot pump mounts to the end of it,,, all three pumps stacked end to end of each other.