Does anybody have a parts breakdown for the seal kits for a Case 580C-CK backhoe? Serial# 8959109. I'm looking for a kit number for the swing cylinders and can't seem to find a kit for them. Both are leaking and leaving a big puddle while in use and would like to fix them. Also need to repack the extend a hoe but I think I found a kit for it, #1543252C1. Hopefully the number is right. I hate tearing into a cylinder and having to wait for a different seal kit.
You'll want to check the end of the gland nut, or it might be on the cylinder somewhere, for the stamped part number, as it could be the 1 piece (G101182) or 2 piece (G34881) piston design, and you'll need the right kit for it. You should also double check your extension cylinder number, as any cylinder on that thing could be the 1 or 2 piece design. These are the Case kit numbers for the swing cylinders, you can cross them over once you know which ones you have. 1 piece kit - G101287 2 piece kit - G34594
Look at epsstore.com , they have a good breakdown of nearly all models.
Go to the case dealer they'll help you they got them
Just bought 2 kits for swing cylinders on my 580C CK. Number is stamped on the gland nut.
Ferret, when doing your parts searches for your machine search for 580C parts and leave out the CK..Mine is an early C and your serial # is higher than mine, CK is the earlier model..your searches may be easier without the CK...Like the other guys pointed out the gland number is the easiest way to tell the kits you need...