This has been sitting for 3 years trying to start but only getting a very small amount of full up to the injectors put new lift pump new spin on fuel filter, drain fuel tank filled back full with fresh hot wired shut off solenoid crack fuel line at injectors and getting very little took bleeder strew off fuel filter base getting full stream when using pump. You can here solenoid clicking when jumper wire is attached I feel it’s has to do with solenoid screwed it out and hooked 12volts to it plunger extends out cannot see into the injection pump hole where solenoid goes need to find a mirror help please need to have it moved by march 1 or new land owner will take ownership
No replies yet.