Im helping work on a model 33 backhoe the 4 lines that run thru the bottom of the backhoe are missing ( steel manifold lines ) just curious what most are doing i know i ran into this with my backhoe and i found a manifold for mine which we are looking for, for this backhoe. Until then what are you guys doing with the line routing this one has 2 rubber lines per side on the outside of the backhoe not running threw the center. I remember this being a problem until i got the manifold if you have another way of routing them or if you know of a manifold for sale please let me know thanks
The manifold is subject to damage and relatively expensive to replace. If you route the hoses outside the swing tower, they will also be exposed to damage. I had several leaks in my manifold, brazed a few times but finally spent the $ on a new one. New hoses and a number of years with no issues. Keep the spoil, especially rocks away from the machine as you work and you won't have problems. With more experience as an operator, you will not be digging in close to the machine.