We have a Super N with 1000 hrs. It has had trouble since it was new, and back to dealer 2 times with no help. Warranty is now out, and has been back to shop again for this continuing problem and still no improvement. The front bucket will roll up when supporting machine while digging with backhoe, the boom will creep to side, and bucket dipper cylender will creep off rapidly, and has low power on all functions. Any ideas as to what to look for. Any help will be appreciated. Thanks
If it was having these issues while under warranty and the dealer was not able to repair the problems then they still owe you the repairs. Does the dealer know your problems were never fixed?
Yes they do know. The boss has went above the service dept, when we got a bill for the repairs, that has done no good at all.
http://en.m.wikipedia.org/wiki/Lemon_law You should read this. Case owes you a properly working machine you paid fir and never received.
I would warrant this machine unsafe right from the get go .Maybe time to sit down and have a chat with the Case area Rep or consult another Case Dealer