I have a hole in the A/C high side line and another forming on the low side line near the compressor due to a bracket. Anyone know the size of these hoses so I can cut out the bad spots and splice them? This is for a FPK03040 - thank you!
Are these lines standard sizes? Can’t find any info on them (circled in red).
Without a doubt, 6, 8, & 10 will be the only choices. Buy 3 splices and return the unused one.
They will be "reduced barrier" hoses.
It was an 8 and 10. The 8 worked fine. The 10 was super tight - could not get it on all the way but just enough to get some clamps on.