Heavy Equipment Forums Heavy Equipment Community

Cat 320 DL No Start Condition 6.4 L Acert

Avidoutdoors ยท 2022-04-28 10:58

Crank no start condition, have fuel to the pump but no fuel rail pressure. Don't appear to have voltage at fuel solenoid on the pump. What is specified voltage? Does anyone have a service manual for this machine? CAT0320DVPHX00929

Replies4
  1. #1heymccall2022-04-28 12:12

    If your proficient in using the monitor service menus, check to see if the RPMs are indicated while cranking. I believe that they are under "Status", then "Inputs". My 314D (C4.4, same electronics minus 2 cylinders) lost the crankshaft sensor (no codes) and cranked but never turned on the fuel. Zero RPMs were shown while cranking.

  2. #2nowing752022-04-28 12:15

    If you want to send me your email i could send you some info> i take it you have et and are seeing no rail pressure?

  3. #3Avidoutdoors2022-05-05 10:00

    I do have rpm signal

  4. #4Avidoutdoors2022-05-05 10:01

    [email protected] Thanks