Looking for assistance with an ECM Error. First time having any problems with the excavator. Problems first appeared two months ago when my father noted the swing brake was engaging preventing him from rotating. No errors on screen at the time, and he turned machine off/on to restore functionality. Checked Swing drive oil level and it was ok. Now, we are getting ECM error on screen a minute or two after starting that causes machine to depower from rabbit to turtle speed if moving; also, engine throttle dial won’t slow down if ecm error; and machine won’t swing. Logged errors on monitor panel are: 374-05 1525-05 376-05 598-05 600-10 110-10 167-08 Any advice or solutions? I’ve read the past 50 pages of posts on the forum. thanks.
374-05 swing brake solenoid current low 1525-05 straight travel solenoid current low 376-05 travel alarm current low 598-05 travel speed solenoid current low 600-10 hydraulic oil temp abnormal rate of change 110-10 engine coolant temp abnormal rate of change 167-08 alternator charging voltage abnormal frequency