Anyone on here have some info on the following codes this machine started throwing? 2017 415f IL 5055-18 1888-3 653-6 639-2 2524-3 machine serial CAT0415FVPF400675 Machine is new to us, was running fine then had very little drive power (engine seems to be running ok) and warning light in cluster came on replaced fuel filters, warning light went away and seemed to be running better but now back to low power. Cat tech scheduled to look at it next week but would like to see if its something simple
5055-18 - Fuel in engine oil. 1888-3 - GPS antenna voltage above normal 653-6 - Injector cylinder #3 current above normal 639-2 - problem on J1939 Datalink 2524-3 - Product Link antenna voltage bove normal Looks from that list as though an engine oil & filter change should be first on your list and see where that takes you. When the tech arrives he'll have to do the tests on #3 injector.
Thank you! Filter and oil change is first on the list for sure.
Update- tech came, reset the oil life, ran a Regen cycle, tested the injectors, cleared codes, all is fine. He thinks that possibly just resetting the oil life would have done it. All has been fine, he mentioned if it does it again then we may have an issue with the #3 injector that was throwing the code originally, but no sense in digging into it at the moment.