My 2005 420D has factory installed aux hyd's, powered by the E-stick circut The E-stick cyl is pinned for this use and the system work's perferct.The only problem is releasing the pressure on the supply side quickcoupler to connect the tool's any idea's ?????
turn off machine, and turn key to on position do not start and bleed off pressure using the ext hoe thumb wheel give that a shot and let me know how you make out
My machine has a foot pedal for e-stick /tool operation tried bleed off with ign switch in on position (not running)after shut down did not help.This procedure is in the opperation manual I have tried it several times.:Banghead
You will need to get ALL of the pressure out of the machine hydraulic accumulator, so activate ALL backhoe functions with the key on - boom, stick, bucket, swing, e-stick before trying to connect. Also need to do that BEFORE DISCONNECTING any tool to make sure there is no pressure left in it for the next time. After you disconnect any tool, connect both lines together to make sure no pressure builds up on one side of the tool while it is sitting - especially in the sun.