Heavy Equipment Forums Heavy Equipment Community

Cat 426 series 2 electrical problem

RandR Repair ยท 2013-04-09 17:08

Unable to get signal lights to work would like to get a schematic of the electrical from the ROPS down to the dash. Replaced flasher, flasher works but no power to turn signals, turn on headlights and 4 way does not work, tulookrn off headlights then 4 way works but new lights wont light. Did anyone experince this problem.

Replies1
  1. #1Bob/Ont2013-04-09 17:17

    You have a ground issue, the giveaway is the 4ways working untill you turn on the headlights. When the headlights are off the 4 ways can backfeed through the headlights and get ground. Groung cab and see. Later Bob