We replaced the valve last year with a new one as the other one was leaking air. And it worked fine the remainder of the year. This spring we hit that pedal, which we normally never use, and it is continuously dumping air to the point where the machine will not build up anymore. No amount of pounding on it or anything else helps. The old valve we used to be able to wrap on and it would stop leaking. This one we cannot and it is a new valve. Any thoughts? Also if we need to replace it, until we get a new one, can we block the lines on each side or does that somehow interfere with the rest of the air circuit and the main brake pedal? Thank you
No replies yet.