Heavy Equipment Forums Heavy Equipment Community

CAT D6K2 XL Dozer Solenoid Location

ms0115 ยท 2021-04-20 21:43

CAT D6K2 XL Dozer Serial # WMR00661 Can someone tell me where the pump forward control solenoid is located. A diagram would be helpful and much appreciated. Thanks.

Replies4
  1. #1Cmark2021-04-20 22:57

    There are two pumps, left and right. There are two solenoids to each pump (#4). The easiest way to identify which is which is by looking at the colour and number printed on the wires.

  2. #2ms01152021-04-21 04:34

    Thank you Cmark for the response and information. The machine threw a 1705 -05 code. The machine quit going forward, but would still go in reverse. If one of the two forward solenoids goes out would it stop both tracks or is there a common solenoid downstream?

  3. #3Nige2021-04-21 11:05

    Now if you'd said that earlier ......... 1705-5 Right Drive Pump Forward Control Solenoid (10) : Current Below Normal Functionality is lost in forward direction. Motion is reverse direction is allowed with level 3 active event. Troubleshooting procedure attached.

  4. #4ms01152021-04-21 13:56

    Thanks for all the information. Found a break in a wire. All is well and back up and running.