Hi, any assistance with this would be appreciated. Caterpillar 140G Grader blade tip cylinder, RHS blade up down cylinder doesn’t neutralize after pushing out until Push lever in opposite direction This started after a mechanic re-sealed the right side valve bank.
Need the grader serial number
Hi 50H0658 South Africa
My bet is that he reassembled the valve bank, or reconnected the lines to it, incorrectly. Do you have a Parts Manual.? If not you’re probably going to need one sooner rather than later.
Hello everyone in South Africa! But there's no such prefix. Here's a list of 140G motorgraders.
Start looking at the last thing done, it's usually a good clue to any failures after repair.
Its binding, if the springs are ok sometimes its the way the sections were tightened and torqued sometimes just loosening them and tightening in a more even sequence, you can check this by loosening the bolts with machine off and see if its free.