Good evening everyone, I'm back with a problem with this telescopic loader. The steering cylinder on my rear axle is leaking, so I decided to replace the gaskets, when I took it apart I found that it had been taken apart before, or even replaced entirely. The problem is the following: The turning modes of the wheels do not work for me. From what I've read, those sensors on the cylinder must read the magnetic ring inside the cylinder. I found the repair kit. And that separate magnetic ring, the problem is that I don't know what that ring is or where it should be mounted. Or if I still have it on my rod. Does anyone know where it can be?
The problem was solved, I found the magnetic ring where it came from and replaced it with a new one