Heavy Equipment Forums Heavy Equipment Community

Changing Segment on D8k…Tourque?

oilerman ยท 2017-12-13 13:56

I am in the process of Changing the sproket segments on my 8K and I am just wondering how many pounds they should be tourqued at?

Replies6
  1. #1hargrove2017-12-13 14:21

    250 ft. lbs. plus or minus 50# Then turn another 120 degrees.

  2. #2oilerman2017-12-13 19:46

    I am using Jet lube Copper coat on the threads...Tha should be good right?

  3. #3hargrove2017-12-14 11:15

    Should be fine. We use copperbased Loctite anti seize

  4. #4oilerman2017-12-15 22:29

    https://www.instagram.com/p/BcqZz0ZB1KC/?taken-by=northernfarmerab One side done....im on the right side now

  5. #5old-iron-habit2017-12-16 19:52

    Make sure everything is real clean. Including the paint must be removed.

  6. #6oilerman2017-12-16 22:54

    You betcha!!