RDU, Feed unit, motor, spare motor, 4 climax bearings, 4 extra support bearings, small bore kit with 3 bearings, 2" bars- 4,5,6,7,9,13 1.25" bars- 4,5,6,9. Bar set up pilots and cones. Flycutters up to 14", Mics 0-16" digital calipers 0-18", tool bits and grinder. OTC 10K psi pump with 55 ton hollow ram, bearing pullers. Service truck bar storage compartment, Knack box, plus more. please look up https://www.facebook.com/pg/Line-Bo...ng-buysell-112896155944827/photos/?tab=albums for 70 photos with descriptions.
Justin, Get rid of the 1149 description, you have a BB5000 2" diameter spindle bore...good luck!
StanRUS Is this a good bang for the buck deal. Im a small shop. Would use it 10 or so time a year. Iv been looking at thease systems for a bit all the extra bits seam to add up.
Lot of Bucks for the bang, IMO. OD micrometers, eBay still has reasonable pricing, same for digital calipers. Estimating 10 boring jobs per year, okay average bore diameter 5" (??) I would consider Chinese manufactured DTH TG50plus, 50mm-1.99685”Ø and 35mm-1.37795”Ø bars, 13.750”Ø bore advertised capacity, complete kit, tool bits, digital tool setting caliper, setup centering jig, small tools etc. BW350 1.5 to 14.0Ø advertised capacity, 8.2” stroke, BRS type spiral type bore welder. Waiting for current price, was under $8K for both Oct 2016. BOREWELDER SET UP
DARO, Price for TDG50Plus portable line borer $5,269.00 // BW350 auto bore welder $2,687.00 // PM if you want manufactures' contact details.
asking $35,000 with delivery
DTH TDG60 Standard Kit // 60mm-2.3622” Ø bar X 6.5ft, German manufactured Eibenstock REVERSIBLE motor, 2-speed 0-48/48-158rpm, Ph1 110-220V 50/60Hz. RDU drive ratio 3:1 (standard), Motor mount SAE#2-2bolt. AFU infinitely adjustable from 0.0”-0.019”per rev, Feed stroke 11.98”, Clamp on Tool Holders 4.72”-23.62” bore Ø...Double Mounting Arms 2ea, spherical bearings 2ea, mounting hardware, Tool Kit and Digital Tool Bit setting gauge…$10,774.00 Demo video Facing Heads Mod1 3.150”Ø to 13.780”Ø...$1,208.00 // Mod2 3.94”Ø to 15.75”Ø...$1,254.00
Stan, what's your commission? You pushed the same equipment on me a year ago...
Williams how is that york working out?
Ray S, Factually I sent you DTH's pdf spec sheets on 9/16/16, my commission 0%. DTH's quoted price has not changed still $7712.00 for both units. About the same price as a basic BRS borewelder! DTH's 60mm borer has a couple advantages 1)...large diameter boring bar, equals increased rigidity...60mm bars have loads of tooling available from other manufactures, S. America and European. 2)...RDU drive ratio 3:1 means increased surface speed (rpm) that can improve as machined surface finish profiles and prolong cutting tool insert life (carbide like speed) etc. DTH's machines STILL have drawbacks, i.e. manual operation instead of electronically controlled, just like Climax, BRS, Magtech, Hydratight, Hofmann, etc. I do not need $$$$$! Keeping your' mind challenged keeps you young!
reduced to $30,000
Maybe eBay sales would work out better? NO Cmax BB5000-BB3000 used listed for months! Have trusted buddy set minimum 'high bit' (buy back) so you'll get minimum asking price...good luck!!!!
********SOLD*******
Well one less thing to think about...
Could you send me some info in this setup? Very interested
Follow the links:
Kyle, Chinese Combo RDU-AFU 50mm, forget that. Reason, cutting torque reaction will cause the Combo to try and twist around the boring bar. So that is a unstable set up and will cause carbide chipping.Limited to light depth of cuts! DTH has replaced that with a Cmax clone 50mm. Don't buy 50mm or Cmax 1.750 borers. Buy 2.25 or 60mm borer and used small bore reduction sleeves to use smaller diameter bars. Cmax fiddles with their pdf specifications for the BB4500. Same RDU-AFU as BB5000 with heavy wall spindle(s) Chinese also use lower powered Eibenstock motors @ 1.2, 1.6hp versus Cmax or BRS @ 3.5hp. Cmax Eibenstock motor is approx $2400.00. If you buy RDU, AFU, Motor and 2ea spherical bearings, bit over $10K. Do your own fab for the mounting arms saves $1400.00 ea. Use C1045-1050 bars Melonite surface hardened www.burlingtoneng.com