310d 4wheel drive been sitting looking to crank what should I look for been sitting about 5 years had a problem with wouldn't come out of 1st r would stop pulling when warmed up thanks for any pointers r advice
Welcome to HEF Cody . Check all fluid levels for being high or low. Try and bar the engine over a couple of revolutions to see if it’s stuck or any liquids (rain water, coolant) on the top of the pistons. Check the air filters are in good condition (rodent damage). . Operate the machine to confirm any transmission /reverser issues. I seem to remember that transmission had issues with the first gear bushing seizing to the shaft.