Heavy Equipment Forums Heavy Equipment Community

D3b cat

Funk mech ยท 2016-05-10 18:02

Has any one had shift valve problems with a d3b I rebuilt clutch packs and air checked worked good new tourqe was low on psi so took pump off it was really really bad but still no psi I get about 80 psi in all gears revers or forward the oil pools out of the top of the valve is that normal any info or ideas would be appreciated

Replies1
  1. #1wosama931b2016-05-11 20:55

    Your pressure should increase at high idle, low idle is about 85 or 90. Are you sure that you have the clutch ready to engage as soon as you press on the pedal. Sam.