D5C Series III Hystat PIN 5HS00611 Won't shut off with key. Also won't move or operate while running. Wire to engine shut off is key on hot. Has to be removed to start. Plugged back in to shut off. Blade will move while cranking, with engine shut off connected(thus not starting) but nothing in the operate or move department when running. Will not crank when the steering lock out is engaged. In the up position. Is this normal? Is this all caused by the shut-off timer. Parking brake lever feels kinda wishy-washy. Need schematic to see what turns the pressure to the controls for drive and blade on? Any help greatly appreciated!
PM sent.