Looked at a d5n this evening that gets a code for intermittent speed sensor#1. Pulled the floor pan to see if I could access the sensors and found wording run through one of the bolt holes for the pan. Does any one know if you can get acces to the sensors as in was told you had to have the trans out to get to them but the pic in the book looks like they are just aft of the floor pan. Thanks for any input
Woops should have read found wireing in the bolt hole, looks like someone has already hacked into the bundle.
The sensors are in the trans so it will need to come out and then be separated from the bevel gears. There was a problem with erratic signals between the two sensor so there was a new flash file to fix it. It ended up not using both and used one along with the output sensor instead.