2014 CAT. D6K2 XL -Dozer Serial: WMR00661 Can someone tell me the procedure for pulling the codes out of the on board diagnostics? Thanks
See attached for how to access the Service Menu
Thanks again for the help. We will give it a try Tuesday.
I looked all the information over. It doesn't require a code like the excavator?
Nope.
Can someone provide insight on this codes? 246-09. 872-09. Both had A039 above the code.
All points to a wiring issue or a bad Pitch Rate sensor. Suggest to go looking at harness connections or for chafed wiring first.
Codes E361-2 ECM detects engine cooling issue - Derates E361-3 Engine gets hot and shuts off E396-2 High fuel rail pressure - Derates E398-2 Low fuel rail pressure - Derates These codes have recently come up. The machine is derating. The radiator is clean. The fan is functioning. Changed the thermostat and temp sensor. We cleared all the codes with or laptop (not E Tech) Could anyone give me help on diagnosing and repairing these issues. Thanks for all your input over the years.
Is this on the same D6K2 machine.? If so ............ Those two Events together sound as though possibly the rail pressure sensor could be playing silly buggers.....
If it’s a 6.6 we had trouble with the water pump impeller braking
It is a C6.6.
Got these codes on a D6 any help appreciated also got the codes mentioned above
Can you start with a Serial Number please. It makes it easier to look up information. So you have the two in your photos plus which of the other ones mentioned above.? 3547-03 is a problem in the circuit for the water detection switch on the fuel filter bowl. E283-3 is a low charge pressure event but in order to go any further the machine S/N is required.
Disculpe Cual es el sensor de velocidad de cabeceo?