When the transmission is engaged i can only get 1500 rpm if its disengaged i get 2100 rpm i can move the blade and rippers and it doesn't bogg at all. Any gear above 1.5 and it barely pulls itself and if i try to turn it will come to a stop. Blowing some black smoke. It had a active code for the torque converter speed sensor I replaced it and the codes not active now. The brakes release as they should. When in neutral, parking brake off and i try to turn it doesn't bog down at all and I notice that only the right hand track it's pulling. I was not sure if there is just one turning motor? Fresh fuel filters,air filter,all turbo boots are good. Just seems like it's related to the transmission being engaged. Thanks for any input.
Please don't make duplicate threads on the same topic as it just muddies up the Forum. Anyone with information reference this thread - HeavyEquipmentForums Thanks