i have a 2007 350 d excavator that once machine is up to operating temp idiot light comes on and derates engine .runs for 3 to 5 min than you have to wait for 3 to 5 min befor light goes off and normal digging can be resumed,if you turn off machine and restart right away you can run for the standard 5 min, machine has brand new reman engine including all new fuel system pump turbo etc was doing this before install of new motor
also machine is not over heating on gauges or checking with a heat gun
try draining your water seperators on fuel filters. we run into that problem also.
all new filters and new fuel pump ,only code that comes up is one for an air to air sensor
When the light is on and you go in to the monitor does it give you any more info on the warning? I can tell you that the water level sensors in the d & g series are very sensitive. Really make sure the coolant tank is full all the way to the high mark. We have 13 D or G machines right now and at least once a week I get a call for this.
D doesn't have the sensors in the overflow tank like the G. since this problem is there before and after the engine was replaced??? and is a charge air code (how do you know this?) I'd check the short hoses at the inlet and outlet of the charge air cooler,they're notorious for splitting.
one six pack.....what code are you getting and how are you retrieving it?
I'm getting the code out of the trouble shooting menu on the dash codes are 13311-4 ,2630-0,1569-31,2630-15