Hi guys, Does anyone have any ideas what i could do to resolve this issue. I replaced the relay module on an EMCP II panel, then opened the face panel with the factory silver seal broken and did some cleaning, after re-installing the EMCP II panel the intermitent shutdown problem the generator was having prior to the repairs was resolved, only it keeps flashing 700V on the uper display instead of showing the correct running voltage of 400V, but the current fluctuates a little and comes to accuracy when on laod.
This sounds like a generator, right? go over to smokestak.com . There are some great generator guys there, they tend to know the oldies, but they might be able to help you out, or send you in the right direction. Also, this site prefers that you don't post the same question twice, it gets real confusing.
Thanks Delmer, i'll check at the site you refered. Sorry for the double post, it was due to the fact that i'm new on the site and still learning how to navigate then.