Does anyone have information about the EUCLID R90 mining dump truck? Like parts manuals, operator manuals, etc.? Or where can I find this information? Thank you!
Euclid's are a bit of a problem to get parts for now, the history of them is a right trail of sell outs and mergers. They were joined first by GM who were then forced to sell out under competition laws, who then sold to White, the name and machines were split at this point with GM still making them but under the Terex name, in Scotland but also white produced them under White Eculid name, until they sold to Damiler Benz, who sold to Clark Michigan who then joined with Volvo to form VME, who then did a joint venture with Hitachi and relinquished the last bit of control to Hitachi around 2000, so as you can see trying to get parts depends at what point the machine was made as to who had the control over parts/licence to make them and whether that company still has parts for it. With it being an R90 it was produced approximately 1995-2000 which is around the time VME and Hitachi made the Eculid machines, so there is a chance of parts being available under either brand. But I know for sure there is no current computerised parts system on the Volvo side for Euclid machines, so you will need part numbers or an old school company that still uses or has parts books. The engine is a Cummins KT38-C or on the rare side Cummins KTA38-C and the transmission was an Allison DP-8963 if that helps any.
好的，十分感谢您的回答。