SENNEBOGEN SENNEBOGEN 355 E what do you think of this telehandler? Jcb 535 95 agri plus Merlo turbofarmer 45.11 170 Dieci agri plus 40.9 Manitou mlt 940 140v+ jcb (536-95 è il modello attuale merlo 27-6 trasmissione idrostatica 40 km/h multifarmer 27.8 panoramic these are the most used models in my part, what do you think? what is your opinion about it?
Depends on where you are located in the big world. We had merlos for a while. They where great units over all. Very few mechanical issues. However due to them meeting European safety standards they where sensor heavy and sensor sensitive. You could not just let any joe smo on a job site hop on it with out it shutting down for working it outside its safety envelope. Jcb is well known in the USA and is also a very durable well made unit. We have lots of jcb reach forks from 5k to 12k floating around. Dont have many mechanical issues with them. Dont have any personal experience with any of the others. I do believe that most manitous at least here in the USA are basically the same as Gehls in the 10k and under telehandlers. Like most things its service after the sale and local dealer support that would be my deciding factor.
Thanks to your information, the construction companies are customizing the new machinery with particular set-ups and configurations, now they make construction machinery for the construction sector and machinery for the agricultural sector for the countryside and farms or for the woods and livestock for the sector building by customizing the machinery according to the indications of the users, starting clearly from standard basic machinery, am I wrong? http://www.masseyferguson.it/mfth.aspx ** massey e ferguson new telehandler? MODELL MAX. HUBHÖHE MAX. HUBKRAFT LEISTUNG PS GETRIEBE ** TH.6030 6,0 m 3.000 kg 100 Hydrostatisch ** TH.6534 6,5 m 3.400 kg 130 Hydrostatisch ** TH.7030 6,7 m 3.000 kg 100 Hydrostatisch ** TH.7035 7 m 3.500 kg 100 Hydrostatisch ** TH.7038 7 m 3.800 kg 130 Hydrostatisch ** TH.8043 7,5 m 4.300 kg 130 Hydrostatisch
that FENDT has to be expensive!
ow much would it cost? in my part we have few economic resources, therefore we buy used machinery and exploit them to the bone until they are completely worn, once destroyed we replace them with other used machinery, the carcasses of old machinery we cannibbalize them, we disassemble the reusable parts the rest we carry from the scrap yards to be remelted. ** TH.8043 7,5 m 4.300 kg 130 Hydrostatisch???