Hi Everyone I am having a problem with this machine, Genie GS3268 serial no. GS6807-48260 , when you start up the machine and want to drive it, it is like the brakes are on. As you drive, with in half a meter, the engine wants to stall , if you do it 2 to 3 times without the engine switching off it suddenly goes and will drive around without a problem. But as soon as you switch off the engine and start up again the problem will all start again as before. Please could anyone assist with this problem?:idea We did have a look at the brake valves but they seem to be fine, but not 100% sure. Regards
Hi Found a major problem, metal in the manifold and after more investigation we found one of the drive motors broke its drive shaft and the actual drive motor seized because of the metal pieces.