Hi We are working on a 2007 Genie s-45 s/n 507-13857. The problem it has is all functions stop working at random. It might work for an hour or a minute, then drive, steer, and all boom functions stop working. The engine will stay running. Shut it off and restart it and it will work again til next time. Any ideas where to start looking? Thanks
check the e stop contacts in platform and look for trouble lights on the alc 500 board
On the card the lights flash count the lights most have the trouble code chart on the inside of the box In the platform
Check both estop contact blocks at ground and platform for input and output voltage and fluctuations when issue occurs