Hi Guys Hope someone can help me please. My machine has drive problems.:beatsme 2000-model s/n: 2089 4x2 drive When i put it in hi-range all is fine, good speed but low torque. But when i put it in lo-range to climb onto the truck or any small incline i have very little speed and also very low torque. The wheels can't even climb onto a 1.5' timber board on a slight incline I measured the pressure at the drive manifold it measures correct at 250psi. When i try and drive(reverse/forward) it moves with a shaky motion like the brakes or clutch is holding and then releasing, also if the one wheel spin it seems that the other wheel loose all power(drive) and just stands still- it is not assisting with driving forward or reverse. The wheel that spin is also always the same wheel. Please any assistance or guidance will be appreciated. Regards
No replies yet.