Heavy Equipment Forums Heavy Equipment Community

HD 2045 excavator Bucket

Vivian · 2012-06-28 00:01

From side bucket capacity:2.5M3

Replies14
  1. #1Vivian2012-06-28 00:04
  2. #2Vivian2012-06-28 04:50

    I like this bucket very much. It is MADE-IN-CHINA.

  3. #3Vivian2012-07-02 06:55

    drawing for bucket

  4. #4Vivian2012-07-02 06:57

    what it would be like? will pass photos tomorrow......

  5. #5JGS Parts2012-07-02 07:37

    i think this is a very basic and bad bucket there is a lot of things you need to improve on it especially the wear strips i know that also they are old peaces of rail line welded between the teeth abslutly useless and also the back wear strips this is from a very cheap manufacture in china and i can tell you have justed used Q345B mild steel for this bucket also.

  6. #6JGS Parts2012-07-02 07:41

    also i see that you got the photos of the internet from a chinese machinery website i know it well also that drawing is of a skelton bucket we are a professional bucket manufacture in china also it is using very poor teeth and adaptors and the skelton bucket has the teeth welded on the inside of the bucket so the walls will wear out first and things hounestly this is just another cheap chinese bucket

  7. #7greggn2012-07-02 13:50

    Is this another sales pitch ??

  8. #8245dlc2012-07-02 15:45

    Yeah more Chinese crap.

  9. #9Vivian2012-07-03 04:44

    Sorry, Sir. I cannot help you on bucket, i do not sell bucket. if you do not like, please leave here. :beatsme

  10. #10JGS Parts2012-07-03 04:49

    if you put something on HEF please expect it to be talked about or commented on do not think that you will only get positive comments on here.

  11. #11Vivian2012-07-05 06:03

    Yes, you are right i should not expected all the comments are positive. But the bucket is not cheap. You pay what you get, not all the things made in China is cheap and ****. I know there are bad guys here, but you cannot said all the businessmen here do the **** staff. I know it is a long way to get your identity. We will make it. Thanks for your comments anyway.

  12. #12JGS Parts2012-07-05 06:13

    I am a bucket manufacture in china ok i know of what you speak and i knwo that is a cheap crap bucket it looks like it is made in foshan in a factory i knwo and i qill bet you all the money in the world it is made out of Q345B or 16NM

  13. #13JGS Parts2012-07-12 21:36

    hey guys this was the response i got from Vivian calling me a dog and all this crap in chinese because i said a few things about the bucket she was supposedly not even trying to push but anyways this just goes to show her type of person.

  14. #14greggn2012-07-12 22:06

    It is probably time for the moderators to BAN certain individuals who keep trying to promote their goods on this forum. There are 2 that I can think of.