Hello experts, I ordered a new core assembly radiator for my 1969 D4D & was shipped the wrong core. Rang the supplier & they couldn't accept they shipped the wrong core. It's twice the size of my D4D core. Measurements (roughly) are header length 725mm (28.5"), header width 200mm (7.9"), core height 820mm (32.3"), core width 660mm (25.9"), core thickness 95mm (3.7"), five (5) mini cores make up the total core thickness of 95mm (3.7"). 16 bolt holes from top hole to bottom hole, including the header holes. 4 bolt holes across the header width. Manufactured by CTP in the USA, supplied to me by an agent in Australia, that's Australia not Austria. Photo attached, hopefully. No part # on the core. It has two tags on it. Tag one is a small metal tag stamped Z80056. Tag two is a small white sticker printed with B1.0820A0660.252 Any clues to what machine this beast is meant to fit will be greatly appreciated please. Kind regards, Dingo 55
Isn't there a number on the box so they know what is inside?
No numbers on the box. One sticker on the side of the box with the part # 1S0364 CORE A - RADIATOR QTY 1 Production Code 000GBZ9. That's a CTP sticker & the CTP part # 1S0364 is the correct part # for a D4D radiator core BUT they've shipped the wrong core with the wrong part # label on the box (crate). I've sent two queries to CTP USA but they've not replied. Hence why I've posted this query on here, hoping someone might know what the incorrect core is for. Thanks for your question.
I think you will struggle to find what you actually have will fit, but it makes no difference as what they sent you is not what you ordered, so they need to take it back and supply the correct one. If you bought it from Tilly's. Well they are owned by CTP now. I am guessing the 1S0364 has another number 9M6600 although that could be a gasket number. It fits earlier D4D before the D330C/3304 engine. Aftermarket part# CAT669 Tank dimensions 533 high X 540 wide. Header dimensions 584 X 153, 5 row cores and I suspect they have the fins per inch wrong as it probably should be around 9fpi, not 6.5/7
Whats the newer CAT D4 radiator core measure? D4D would be a Legacy machine part.... Parts slingers today rarely look back beyond the current machine production when looking up parts. You may have a current D4 core.