Heavy Equipment Forums Heavy Equipment Community

Hydraulic cylinder seal kit

pedrocar ยท 2019-01-22 07:02

Hi getting a little bamboozled with Cat seal kits .I an looking for a wheel lean cyl kit to suit a g series grader S/N 3wc 1303 while very little info on SIS tells little info numbers ive obtained are 246- 5917 would these be correct Thanks

Replies7
  1. #1Nige2019-01-22 08:59

    Pedro, the answer is that it all depends what Part Number of wheel lean cylinder you have. There are 3. 246-5917 is the correct seal kit for a 9T-2520 Cylinder Group (3.5" bore x 6" stroke). 246-5914 would be the correct kit for either a 3G-4752 (5.9" stroke) or an 8J-5539 (5.8" stroke) cyl gp. On checking the 246-5917 Kit actually contains more seals in total than the 246-5914, so it would work for any of the 3 cylinder Part Numbers. Just that if you used it with the 2nd or 3rd Part Numbers of cylinder you'd have an O-ring, a backup ring, & a wear ring left over.

  2. #2Pipevine2019-01-22 14:29

    Not sure where you're located but in OKC theres a place called sealco. They have/can get just about any seal you need . You just take in your disassembled cylinder or go in and give them your make model serial and which cylinder, and they get you everything you need.

  3. #3pedrocar2019-01-23 06:28

    Hi Nige yes its a 9t2520 thanks for the advice

  4. #4pedrocar2019-01-23 06:30

    Would like something like them overhere

  5. #5Vetech632019-01-23 06:45

    Its things like this that got UPS invented LOL

  6. #6pedrocar2019-02-10 08:31

    Nige glad you came up with the p/n cat didnt have any kits listed for that cyl

  7. #7Nige2019-02-10 08:35

    They obviously can't read their own publication PEXP1020-06 - "Hydraulic Cylinder & Seal Reference Guide" ............