Do all IH industrial engines have the same flywheel? On researching, so far basically I've found that all the d264 d282c282c301 c220 etc all take a nice big starter but it has 10 teeth, , I have a BD 264 the listings all show 9 tooth but all the starter listings for that engine are wrong confirmed yesterday by Komatsu dealer, leading me to think if IH uses a standard flywheel, then this won't be too hard to match up Thanks
Please clarify for me if you are replacing the flywheel, the starter or the ring gear. Be very careful, that you have the correct matching components. A Bendix drive will turn a flywheel even though it may be a one tooth mismatch. The Bendix drive and the ring gear will be destroyed in a short period of time. Been there and done that unfortunately.