Anyone know where I can find track adjuster seals for H-600? Part number P-6008 & P-6412. WC Sales is no longer answering the phone. TIA
Insley parts like seals can be sized up by dimension and construction(OD,ID,1lip,2lip,etc)if you can get it apart and pull the seals keeping it intact you can match it up with a seal from several manufacturers(National,CR,etc) at any decent truck parts house..Are there any numbers on the seals? Even after 35years you might be able to read a number off them and interchange. Probably have to order it in.Bearings the same way.Idlers and sprockets can all be built up and remachined.Depends on how bad you want that old'red iron. Best of luck to ya