Heavy Equipment Forums Heavy Equipment Community

JCB 217 with Wain-Roy biderectional valve parts issue

macmarine ยท 2015-03-31 22:39

we have one of the Wain Roy extradig bidirectional circuit valves one of the 12v solenoids is not working we dismanteled it and the sealed magnet is no good . problem is evey place we call start laughing when I ask for the part . fallowed by good luck finding one . who ever made these for wain roy didn't buy 10'000 solenoids just for the wain roy valve the probly bought 100'000 and used them on other valves they made . but we can not find who was the manufacturer. any one know were there is 1 or 2 solenoids for the wain -roy valve?

Replies8
  1. #1mikebramel2015-04-01 00:36

    Pictures and dimensions please and someone can cross reference for you

  2. #2lantraxco2015-04-01 01:39

    Any chance it looks like this?

  3. #3macmarine2015-04-01 10:16

    have sent the dimensions out to many hyd. valve company's KETA HYD. had some that were close but not it I will try to post the dimensions with pics on this site . thanks

  4. #4macmarine2015-04-01 10:18

    no but I'm willing to bet the solenoid's # 13 in diagram are the same mine has the solenoids facing opposing each othere to the right and left at the tires

  5. #5lantraxco2015-04-01 12:45

    That's from a JCB 3CX-4T, might be close. JCB Part number for the coils is: 25/936801 Can't get the parts list to post big enough to read, lol

  6. #6macmarine2015-04-01 16:20

    we will try that # with JCB dealer it may superseid the one I have 549/91---- the dealer told me I bought the last one in stock any place 5 yrs ago . so on the hunt we go . we heard from Keta yd they can make it for a crazy amount of $ they have a lot of them that were close but not going to work. we are working on posting pics and dimensions it has 9/16 thead . the valve goes 1.0910 or 1 3/32 into the housing the shaft is 0.42600 with a what looks to be a 45 degree tapper on the last 0.0895 " of it. Like I said we will post a good drawing and pic's as soon as the grandkids show up and show me how to do that. we will call around and try this # thank you

  7. #7macmarine2015-04-08 11:44

    we hope this helps with my search this was not as quickly posted as we wanted but the grandkids are hard to get to sit down and help grandpa unless they need some thing .

  8. #8macmarine2015-04-08 11:49

    View attachment 133598 View attachment 133599 sorry it took so long to get this to you needed grandkid's help.