what is the correct way to check trans and reverser fluid?
Transaxle: Near the diff lock there is an access panel on the floor. Under the panel, a dip stick. Add fluid through the dipstick hole. Reverser. There is a dipstick between the engine & cab /op station, right side... . shift lever ..neutral idle for 3 minutes with engine running @ idle & oil warm check dipstick
ok thanks. so run engine half hr to get oil warm?
Manual says run at low idle for "THREE" minutes I would assume they mean from room temperature or about 70 degrees. Might be different if the machine is in the Artic circle.:tong